Tutorial pour enlever ou mettre les db heaters sur Akrapovic
Modérateurs : Tartofraiz, Tartofraiz, enzo13, enzo13, fraisa, fraisa, Tartofraiz, enzo13, fraisa, Tartofraiz, enzo13, fraisa
Tutorial pour enlever ou mettre les db heaters sur Akrapovic
(1) Standard Akrapovic fitted with Baffle.
(2) Unscrew the 3 allen bolts - Be BLOODY CAREFUL with the top bolt as it can easily fall into the exhaust if you haven't got a hold on it!
(3) Take hold of the baffle and pull to dislodge the outer fitting. If it is stiff (never been out before and greased) then a pair of pliers may be required, but put a rag on the jaws so you dont mark your Baffle.
(4) Remove the outer Baffle ring.
(5) Extract the Baffle.
(6) Exhaust with Baffle removed.
(7) Re-fix the outer ring with the three allen bolts (having greased them nicely with coppercrest). Be careful of that top bolt again!!!
1. 2. 3.
4. 5. 6.
7.
Be prepared for the NOISE and complaints from the neighbours.
* Baffles are a legal requirement and should only be used for 'race' purposes. Without the Baffles in you might be prosecuted by the local constabulary.
They have nothing to do with the Catalytic conversion process, they merely reduce the dBA output at the pipe, although on some machines the back pressure that they create is used to obtain the correct engine performance.
(2) Unscrew the 3 allen bolts - Be BLOODY CAREFUL with the top bolt as it can easily fall into the exhaust if you haven't got a hold on it!
(3) Take hold of the baffle and pull to dislodge the outer fitting. If it is stiff (never been out before and greased) then a pair of pliers may be required, but put a rag on the jaws so you dont mark your Baffle.
(4) Remove the outer Baffle ring.
(5) Extract the Baffle.
(6) Exhaust with Baffle removed.
(7) Re-fix the outer ring with the three allen bolts (having greased them nicely with coppercrest). Be careful of that top bolt again!!!
1. 2. 3.
4. 5. 6.
7.
Be prepared for the NOISE and complaints from the neighbours.
* Baffles are a legal requirement and should only be used for 'race' purposes. Without the Baffles in you might be prosecuted by the local constabulary.
They have nothing to do with the Catalytic conversion process, they merely reduce the dBA output at the pipe, although on some machines the back pressure that they create is used to obtain the correct engine performance.
Options : Rétros, clignos AV et poignées Rizoma, ecopes, couvre reserv et Garde B AR carbone, garde B. AV JMV, Disk AV et AR Wave, Durites Aviation,Support de plaques Optionnel, feu AR intégrant les clignos AR, Xenon, Stage I Akrapovic +Filtre a air K&N.
- eliminator44
- Messages : 126
- Inscription : 28 oct. 2007 11:28
- Localisation : Landgraaf Hollandais
Salut,
If you remove the db-eaters, you lose a lot of Nm. Better is to put Slac-eaters in it. Slac is a German Mt driver who produces his own eaters.
They are better eaters than the original Akra eaters.See picture below.
http://www.donnermeister.de/forum/index ... 7217;image
The original exhaust is not bad, below 2300 rpm and more than 3600 rpm its the best.
If you remove the db-eaters, you lose a lot of Nm. Better is to put Slac-eaters in it. Slac is a German Mt driver who produces his own eaters.
They are better eaters than the original Akra eaters.See picture below.
http://www.donnermeister.de/forum/index ... 7217;image
The original exhaust is not bad, below 2300 rpm and more than 3600 rpm its the best.
with blonds more fun
http://s121.photobucket.com/albums/o237/eliminator44
http://s121.photobucket.com/albums/o237/eliminator44
- eliminator44
- Messages : 126
- Inscription : 28 oct. 2007 11:28
- Localisation : Landgraaf Hollandais
Salut,
www.rockslac.de voir tuning slac-eater
Pas super, mais ils sont mieux. "Slac", un membre de Forum dÁlemagne a inventer ce db-eaters et vends ils. Le bruit nést pas mal.j'ai pas tout compris mais ou peut on trouver ces super DB ??
www.rockslac.de voir tuning slac-eater
with blonds more fun
http://s121.photobucket.com/albums/o237/eliminator44
http://s121.photobucket.com/albums/o237/eliminator44
- lecter.luna
- Messages : 1929
- Inscription : 14 févr. 2008 17:17
- Localisation : Saint Maurice, France
- lecter.luna
- Messages : 1929
- Inscription : 14 févr. 2008 17:17
- Localisation : Saint Maurice, France
- Philip J80
- Messages : 5249
- Inscription : 08 juil. 2007 09:03
- Localisation : côte ouest