Forums MotoOuebE : MT01 et Griso...

Stage 3 filters ( velocity Stacks), only used once for Dyno run. € 275,-

Hey baci. Comment vas tu ? Content de te voir parmi nous.
Pascal

I am fine Pascal, just didn't have much time this year for my MT Too busy with my work. I also couldn't find the time to follow all the fora.

MP mister Baci

Hi baci,

I received the package and I mounted the parts on my bike . But what a nightmare !!!

There are parts in the kit doesn't go on my Mt 01 or I don't found where

And there are parts that aren't in the kit that you must get on the bike

For exemple, look at here :

http://www.mt01.hu/upload/5yu_w0750_30_ ... e_set0.pdf

I have : a hose to small, the number 9, impossible to put on the oiltank
the inlet and the outlet of the oiltank are cut (now to short for put hoses easily), and the inlet is slightly crushed
I don't have the small net filter, number 15,
I don't have the small cap number 18,
I don't have the small hose number 17,
I don't have the clip number 10, 11, 16,
I don't have the seal number 13,

By cons, I have 2 screws and 3 nuts ( 1 one big and 2 small) over a steel plate that I use for nothing and they aren't in the manual installation kit of stage III !!!




Are you sure that's a MT01 kit and that's a new kit ???